Monitor Audio Silver RX6 AV

The elegant floor-standing RX6 design places the new wider bandwidth RX tweeter in concert with freshly designed 6” C-CAM® bass and 6” C-CAM® bass/mid drivers to form a balanced two-and-a-half way system. Separate chambers are used within the enclosure to provide differential tuning for the 6” drivers, producing higher efficiency and exceptional low frequency extension. For such a slim, easy-to-position speaker, the innovative RX6 produces an extraordinarily wide bandwidth, enhanced with a natural tonality that breathes life into every format – even HD audio. An adjustable base plinth is supplied for added stability.

• New C-CAM® tweeter design with damped rear chamber, providing improved clarity and wider operating range for HD audio formats
• New 6” C-CAM® bass and bass/ mid-range drivers incorporate RST® technology, for better damping and improved mid-range clarity.
• New cast polymer bass chassis design for better rigidity and lower reflection properties.
• Dual Chamber Bass Reflex with Differential Tuning.
• HiVe®II port technology for better transient response and tighter bass.
• Single bolt through driver system, for increased overall bracing and rigidity.
• Rigid 19mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration.
• Floor level terminal location for easy access and neat cable routing
• Invisible magnetic grille fixing provides clean visual styling when used with the grille off.
• Selected premium quality wood veneers or high gloss piano finishes.

Specifications
• System Format: 2 1/2 Way
• Frequency Response: 38Hz - 35kHz
• Sensitivity (1W@1M): 90dB
• Nominal Impedance: 6 Ohms
• Maximum SPL (dBA): 114.8
• Power Handling (RMS): 125W
• Recommended Amplifier Requirements (RMS): 40-125W
• Bass Alignment: Dual Chamber, Bass reflex with differential tuning.
• Twin HiVe®II port System
• Tweeter Crossover Frequency: LF: 700Hz MF/HF: 2.7kHz
• Drive Unit Complement: 1 x 6" RST® Bass driver. 1 x 6" RST® Bass/Mid driver. 1 x 1" (25mm) C-CAM® gold dome tweeter
• External Dimensions: (H x W x D) inc. plinth & feet 905 x 275 x 310 mm
• Individual Weight: 16.4 Kg

The role of a centre-channel speaker is to reproduce up to 60% of a movie soundtrack, including the critical dialogue content, yet by the sound of some rival systems, surprisingly little time is devoted to its design. The exceptional RX Centre proves the old adage that you get out what you put in. It’s been very finely calibrated to match the dynamics and timbre of other RX speakers for a wonderfully open, detailed and seamless front sound stage in any RX system configuration. We’ve tuned the RX Centre’s multi-driver components to deliver the optimal combination of sonic virtue and size, so that the velvet subtlety of whispers and the explosive force of action scenes are conveyed with equal priority by a compact design that’s perfect for the role.

• New C-CAM® tweeter design with damped rear chamber, providing improved clarity and wider operating range to make better use of HD audio formats.
• New 6” C-CAM® bass and bass/ mid-range drivers incorporate RST® technology, for better damping and improved mid-range clarity.
• Sealed cabinet configuration for accurate performance when installed in cabinet, restricted voids or close to a wall.
• Selected premium quality wood veneers or high gloss piano finishes.Acoustically matched with all other Rx speakers for excellent imaging and consistency of timbre in surround applications.

Specifications
• System Format: 2 1/2 Way
• Frequency Response: 45Hz - 35kHz
• Sensitivity (1W@1M): 90dB
• Nominal Impedance: 6 Ohms
• Maximum SPL (dBA): 114.8
• Power Handling (RMS): 125W
• Recommended Amplifier Requirements (RMS): 40-125W
• Bass Alignment: Sealed Cabinet
• Tweeter Crossover Frequency: LF: 500Hz MF/HF: 3.0kHz
• Drive Unit Complement: 1 x 6" RST® Bass driver. 1 x 6" RST® Bass/Mid driver. 1 x 1" (25mm) C-CAM® gold dome tweeter
• Product External Dimensions: (H x W x D) 185 x 500 x 200 mm
• Individual Weight: 9.62 Kg

It’s widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely you’ll wonder why you ever thought of compromise. It’s also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch.

• Flush to wall placement, with recessed termination.
• Drivers match with other Rx loudspeakers for consistent timbre and consistency.
• Dual di-pole/ bi-pole modes easily selected by switch operation.
• New C-CAM® tweeter design with damped rear chamber, providing improved clarity and wider operating range to make better use of HD audio formats
• Single 6” C-CAM® bass/mid-range driver incorporating RST® technology, for better damping and improved mid-range clarity.
• Selected premium quality wood veneers or high gloss piano finishes.
• Acoustically matched with all other Rx speakers for excellent imaging and consistency of timbre in surround applications.

Specifications
• System Format: 2 Way
• Frequency Response: 60Hz - 35kHz
• Sensitivity (1W@1M): 89dB
• Nominal Impedance: 6 Ohms
• Maximum SPL (dBA): 111.8
• Power Handling (RMS): 80W
• Recommended Amplifier Requirements (RMS): 10-80W
• Bass Alignment: Sealed Cabinet
• Tweeter Crossover Frequency: 2.1kHz
• Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters
• Product External Dimensions: (H x W x D) 300 x 120 x 250 mm
• Individual Weight: 4.69 Kg

For its success a multi-channel film sound mix relies on the profound structural underlay of a properly designed sub-bass engine. Not only can it dredge frighteningly deep and dramatic frequencies from the mix, especially from HD audio soundtracks, it also adds a holistic solidity to the sound, helping you to suspend your disbelief: a vital component in the enjoyment of surround sound A/V systems. The surprisingly compact RXW-12 active subwoofer is equipped by our engineers to turn your RX system (and others) truly seismic.

Using the latest switch mode power conversion techniques, the RXW-12’s new 500 watt Class D amplifier provides enough power to control with brutal efficiency a newly designed, 12” C-CAM driver, which is equipped with a double stack (two magnet) motor system and a massive 3” voice coil.

The RXW-12’s rigid, sealed 25mm (1”) MDF enclosure is front-loaded firstly because it promotes the fastest, deepest bass down to 20Hz and secondly for ease of installation. Wherever you place it, top mounted controls are provided for the fine adjustment of level, turnover and other parameters at the sub. For added convenience, a 12V trigger provides power syncing with your AV receiver.

• Ultra long throw 12” C-CAM driver featuring triple suspension for ultimate linearity.
• Large 3” voice coil and double stack motor system provides high power handling and low distortion.
• Powerful 500W RMS Class-D amplifier with SMPSU able to deliver over 1000 watts peak.
• 12volt trigger - provides switching control from AV amp or processor.
• 25mm (1”) thick MDF construction
• Heavy radial cabinet bracing
• Top mounted control panel for easy access.
• Selected real wood veneer or high gloss piano finishes

Specifications
• Low Frequency Limit: 27Hz (EQ1) 21Hz (EQ2)
• Upper Frequency Limit: 40 - 120Hz Variable
• Power Output: 500W RMS (1000W Peak)
• Low Pass Filter Alignment: Active 4th order 24dB/Octave (2nd stage filter)
• Cabinet Specification: 25mm construction and internal bracing
• Cabinet Alignment: sealed cabinet
• Driver Complement: 1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
• External Dimensions: (H x W x D) inc. amp & driver 340 x 340 x 410 mm
• External Dimensions: (H x W x D) inc. feet & grille 375mm (15") high with feet 430mm (16 15/16") deep inc amp & grille
• Mains Input Voltage Specification: 110 - 120 Vac / 220 - 240 Vac 50/60Hz
• Individual Weight: 22.56 Kg